Microsport In-Line Skate Instruções de Operação

In-Line Skate SpeedometerBASICMICROSPORT®FCC-ID: OWUOK622-7The devices comply with Part 15 of the FCC rules. Operation is subject to the following two

Attention: If the wheel moves after tight-ening of the screws in the direction of theaxle, unscrew the axle one more time andplace one or two of the O

Generally you can calculate the perimeterof a wheel from the diameter (which isusually written on the wheel) with the following formula: Perimeter = D

Attention!Measuring the actual perimeter of thewheel: To measure the actual perimeter of your wheel, make a dot on the In-LineSkate Speedometer Wheel.

2. Viewing ModeYou can browse through the differentstored values of your Skate Speedometer.3. Sleeping ModeSwitches off the display in order to mini-m

Your In-Line Skate Speedometer offers you the following functions:SPD actual speedMX SPD maximum speedAV SPD average speedTRP TIME trip timeTRP DST tr

ming of the wheel perimeter and the unitselection for the distance measurementsas described in section 3.2. ATTENTION: In the unlikely event that thed

If all segments of the display are on afterinstallation you have entered the displaytest mode accidentally. Please try againuntil the display reacts n

light for too long. Cool down the displaytemperature until the operating temperature(0 °C to 55 °F / 32 °C to 131 °F) is reached.Problem: Grinding of

distance between puck and display is toobig. You can check by bringing puck anddisplay close together. If the signal is okwhen they are close together

MICROSPORT can decide to repair orexchange items during the period of thewarranty.We hope you enjoy this unique In-LineSkate Speedometer. Comments are

Thank you very much for choosing the MICROSPORT In-Line Skate Speedometer.This Speedometer is recommended be-cause of the easy installation and hand-l

to Electromagnetic Compatibility and fulfilthe requirements of 99/5/EC with regard to Radio Equipment and Systems (RES);Electro Magnetic Compatibility

B.One spacer for skates with 8 mm axle diameter.C.One spacer for skates with 6,4 mm axlediameter.D.One distance ring.And this instruction manual.The d

2. The keys of the display and their functions SET/DOWNSET activates the Programming-Mode.DOWN - the value programmed is reduced by oneMOD

screw keep an eye on the other screw as well. If the other screw begins to turnfreely please fix it with you hand or ano-ther tool. Store the two scre

press. The second bearing can then bepushed out from the inside (Picture 4). 2. Extract the bearings of the wheel. In thewheel you have disassembled y

3. Install the first of the bearings into theIn-Line Skate Speedometer Wheel. Pushone bearing with your fingers into the holeof the Skate Speedometer

6. Place the distance ring D (smallest of the included rings) on the bearing on the inner side of the In-Line SkateSpeedometer Wheel (Picture 9).5. Pr

8. Stick the long axle screw through theframe and the In-Line Skate SpeedometerWheel and fix it with the second, smallerscrew from the other side of t